Dongguan Jie Tong Electronic Instrument Co., Ltd. 
 Contact: Mr. Zhou 
 Tel: 13760331089 
 QQ: 1511158498 
 T: 0769-82086182 
 F: 0769-82086182 
 Zip Code: 523710 
 Address: Hung Lai Yuen Road, Zhenjiang Tangxia Garden 3 6F 

 Technical parameters: 
 Frequency range: 9KHz-8GHz 
 Resolution bandwidth (RBW): 1kHz-3MHz 
 Amplitude measurement range: +30 ~-118dBm 
 The average noise level:-118dBm 
 Large 6.5-inch high quality TFT color LCD display 
 I / O output standard, automatic test system can be easily 

 Product Overview: 
 R3162 spectrum analyzer is to adapt to the demands of low-cost portable spectrum analyzer. Using Advantest's newly developed direct digital synthesis technology, in the frequency range 9KHz-8GHZ (R3162), achieving accuracy of 1% or less bandwidth, more can be achieved through the built-in auto-correction feature overall level of accuracy of ± 1.5dB. 1dB gain compression and because more than 0dBm, 2 harmonics-80dBc, 2 signal 3rd order intermodulation-80dBc, up to 118dB dynamic range. 
 R3162 Spectrum Analyzer using a newly developed synthetic local oscillator technology, high-speed testing capabilities, up to 20 times / second, it can be real-time test data. Superior cost-effective R3162 Advantest Spectrum Analyzer is a test company to adapt to a broader area of ??light spectrum analyzer. 

 Features: 
 The basic function of enrichment 
 Improvement of basic properties can be used for a variety of areas to R3132/R3132N/2162. Such as built-in auto-correction feature to ensure a comprehensive level of ± 1.5dB accuracy, level correction factor can be stored in memory, the use of DDS can improve frequency reading accuracy. Frequency error rate reduced to 1%. 
 Because the local oscillator through the improvement of synthesis and enhanced scan repeatability, 20 times / second refresh rate, can be real-time waveform measurement. High-speed GPIB increase the capacity of automatic testing, thus saving valuable time. 
 Extensive testing capabilities 
 To be able to measure the EMI pre-amplifier, which were equipped with measurement devices 9kHz, 120kHz and 1MHz, 6dB bandwidth filters and QP detection methods. Narrow width of 200Hz filter is optional. 
 In order to test the function of high-speed time domain can be used for mobile communications, 50μs scanning options can be utilized. Power testing can provide average power and total power measurement. 
 Counting function, ACP, OBW, dBc / Hz,% AM and many other functions can be used for a variety of measurement purposes. Built-in preamplifier is a standard configuration. When the signal is lower than the average noise level, pre-amplifier to ensure high-level calibration and accurate measurement. 
 To measure the filter's attenuation characteristics or parameters such as frequency characteristics of the cable, built-in tracking generator can be selected. Because the output level in a very wide range of settings, you can measure the amplifier gain, frequency response and so on. 
 Easy to use operator interface 
 High-resolution 6.5-inch LCD monitor, test results at a glance. Display data can be output through the fuselage behind the interface to an external VGA monitor output.