Dongguan Jie Tong Electronic Instrument Co., Ltd. 
 Contact: Mr. Zhou 
 Tel: 13760331089 
 QQ: 1511158498 
 T: 0769-82086182 
 F: 0769-82086182 
 Zip Code: 523710 
 Address: Hung Lai Yuen Road, Zhenjiang Tangxia Garden 3 6F 

 Product Name: Integrated Tester 
 Brand: HP 
 Model: 8924E 
 Product Index: CDMA mobile station test equipment maintenance 
 Product information: 
 8924E is optimized for the following applications: 
 * Incoming inspection for maintenance departments 
 * Failure to provide and maintain maintenance departments confirmed 
 8924E CDMA mobile station test set provides a set of key measurements to inspection 500 
 As for the 1000MHz band dual-mode CDMA mobile station performance. As with the 83236B PCS Interface, 8924E 
 Also increased the 1700 to 2000MHz band CDMA test capability. As a high-performance CDMA base stations have been calibrated, 8924E 
 Not only to test the parameters of CDMA phone features, but also can test the performance of the functions of telephone. 
 8924E with AMPS, NAMPS, EAPMS, TACS, NTACS, ETACS and JTACS all the tests 
 Capability that allows you to simulate the same instrument and measurement of CDMA digital mobile station, thus saving you 
 Venue, costs and training costs. 
 To complete the call processing tests, 8924E supports both mobile stations and base station originating call connection, and hang 
 Off. Upon establishment of a telephone call, using 8924E voice loopback test mode will make all the CDMA mobile station 
 Function becomes very simple. Agreement on testing a variety of, 8924E provides access to six user-selectable Co 
 Proposed stack: IS-95, IS-95A, TIA/EIA-95B, BB-74, J-STD-008, ARIB T53 and the Southern 
 Fresh PCS, 8924C also supports several business options, including the 9600 BPS and / 4400 BPS business channel configuration. 
 CDMA receiver for CDMA test source high-precision 
 8924E active sector in the source cell CDMA base station simulator supports the following channels: pilot channel, sync channel 
 Channel, paging channel, traffic channel and the orthogonal channel noise source (OCNS). 8924E also includes a high increase 
 Andean white noise (AWGN) source to provide a work with the CDMA network by the middle of each plot adjacent to 
 Health interference. 8924E CDMA system can be used in the full rate, half rate, 1 / 4 rate and 1 / 8 speed 
 Rate measurements on all four rate frame error rate receiver (FER). Confidence limits of technology used to 
 The acceptance test time is reduced to an absolute minimum. 
 CDMA transmitter measurement 
 8924E based on DSP technology provides average power measurements. DSP-based channel power measurement of the 8924E can 
 CDMA low enough to achieve accurate power measurement. Access probe power measurement is feasible. 8924E by 
 IS-98A/J-STD-018 proposed methods to measure the related power transmission waveform quality, that is, the so-called 
 The ρ (rho) measurements. In addition, the ρ (rho) measurements also report / record the frequency error, modulation phase 
 Amplitude error, and carrier feedthrough. 

 Switch test 
 In order to improve test speed, 8924E support the RF hardware switch between channels, but also support from the CDMA bee 
 Fossa and PCS bands of two to switch to the analog system. 
 Short Message Service to support authentication and